Streamlight 69889 TLR-1 HL 1000-Lumen Weapon Light With Dual Remote Kit
Streamlight 69889 TLR-1 HL 1000-Lumen Weapon Light With Dual Remote Kit
Streamlight 69889 TLR-1 HL Gun Light With Dual Remote Kit - Black
PRODUCT SPECIFICATIONS:
- Lightweight and compact
- Includes keys for Glock-style, Picatinny, Beretta 90two, S&W 99 and S&W TSW and Sig P320
- Fits existing light bearing holsters
- Rail clamp designed to rapidly attach/detach from side of weapon
- Mounts directly to handguns with Glock-style rails and to all MIL-STD-1913 rails
- Powered by two CR123A lithium batteries (included)
SUPER BRIGHT TACTICAL WEAPON LIGHT
The TLR-1 HL is a high lumen lithium battery powered Gun-Mounted Tactical Light featuring shock-proof high power LED technology and providing 1.5 hours of continuous run time.
Tethered battery door and latch mechanism prevents battery door loss while providing easy battery replacement. Rail clamp system securely attaches/detaches quickly and safely with no tools and without putting your hands in front of the muzzle. When enabled, strobe activated on two or more momentary paddle hits.
Includes TLR-1 HL with Safe Off Tail switch, Dual Remote Pressure Switch, (2) Mounting Clips, 3.75" Adhesive pad, (2 each) 11"; 8" and 4" Cable Ties, and Instructions.
High power LED for extreme brightness.
- LIGHT SOURCE: High power LED, white, impervious to shock.
- LIGHT OUTPUT: 1,000 lumens, 20,000 candela peak beam intensity, 283 meter beam distance, 1.5 hour run time.
User programmable strobe can be enabled/disabled. TIR optic produces a concentrated beam with optimum peripheral illumination. Optimized electronics provide regulated intensity.
TLR-1 HL HIGH LUMEN RAIL MOUNTED TACTICAL LIGHT
Built To Last:
- CASE MATERIAL: 6000 Series machined aircraft aluminum with black anodized finish.
- LASER HOUSING: High impact, chemically resistant engineering polymer
- LENS: High temperature, shock mounted, impact resistant Borofloat glass; white gasket sealed.
On/Off Switch:
Ambidextrous momentary/steady On-Off switch. Double tap of momentary paddle within 0.4 seconds activates strobe. Strobe can be disabled.
FEATURES:
- IPX7 waterproof to 1m for 30 minutes
- Serialized for positive identification
- Extensively live-fire tested.
- Operating temperature: -40 to +120-degrees F
- Length: 3.39 in.
- Width: 1.47 in.
- Height: 1.44 in.
- Weight: 4.32 oz with batteries
TLR Compatibility List: The recommendations listed apply to full-size weapons unless otherwise noted.
BERETTA: Cx4 Storm (carbine/rifle) – TLR fits with 1913 key. Px4 Storm (Pistol) - TLR fits with standard key. NOTE: M lights are VERY loose. Vertec - New polymer key – 1913 Older aluminum key – GL (Standard).
CZ: P-01 - Should work with GL (Standard) key. (Not tested; based on similar European version)
FN: 5.7 (with Picatinny style rail) -1913 key.
GLOCK: Any with rails – GL (Standard) key Cannot fit Glocks that ARE NOT equipped with factory rails. After installing a contour remote on a TLR-2 equipped Glock it will likely be necessary to rezero the laser.
HK: USP (full size) uses our HK adapter 69085 with a GL (Standard) key. The (compact) uses our HK adapter 69091 with a GL (Standard) key. HK P2000 is supposed to have Picatinny rail. (NOT CHECKED) HK P30 -1913 key. NOTE: The rail tilts down slightly from the bore. This may result in laser zeroing difficulty closer than 50 feet (depending on the tolerances of the pistol and laser).
KIMBER: TLE RLII (1911 with rail) – Picatinny key.
RUGER: KP345 – GL (Standard) key. SR-9 – GL (Standard) key.
SIG SAUER: GSR or 1911 Style with flat bottom rail - Picatinny key. ANY ALUMINUM FRAME SIG WITH A ROUND BOTTOM RAIL: Including the P220R, P229R, etc. The Sig round bottom rail departs from the true shape of both the 1913 and Universal standards and may cause an improper fit. The TLR will work with the 1913 key but THERE WILL BE DAMAGE to the finish of both the gun and the light. The retaining fastener must be TIGHT. Newer Sig P series guns are supposed to have a true Picatinny rail. This has not been verified by Streamlight. SP2022 - Polymer frame. Same comments as for aluminum frames, EXCEPT that the polymer frame is a little thicker and does not show marks from a clamp because it is molded from black material. PER SIG, the TLR with the 1913 key works.
SMITH & WESSON: On the TSW and 99 models, the slot is too far back for the standard key and requires the special S&W key. There are many different models of TSW, but as long as it's a TSW WITH A RAIL, it uses the S&W key. Smith & Wesson M&P autoloader takes the Picatinny key. SIGMA – Cannot fit.
SPRINGFIELD ARMORY: Operator (1911 with rail) – Picatinny key. XD (4 & 5 inch barrels) – GL (Standard) key. Cannot fit 3” barrel.
WALTHER: 99 - New (2004 models) FULL SIZE ones are nearly the same as the S&W 99 and use the S&W key. Older ones (no slot across the rail and the side grooves CLOSED in front) cannot be fitted with a TLR. 99 Compact – Cannot fit. Rail is too short. P22 – Cannot fit. Non-standard rail.